Volant en fibre de carbone pour Toyota FJ Cruiser (2007-2023)

2007–2023 Toyota FJ Cruiser Real Carbon Fiber Steering Wheel – Black Perforated Leather | Red Stitch & Red Ring

Transform the cockpit of your  FJ Cruiser  – one of Toyota’s most iconic off-road SUVs – with a  genuine autoclave-cured carbon fiber steering wheel . This premium upgrade features  black perforated leather ,  red double stitching , and a  bold red central ring  for a sporty, race-inspired look that stands out whether you’re tackling trails or cruising the highway.

The wheel is a  direct bolt-on replacement  designed to retain your factory airbag, multimedia controls, cruise control, and all factory functions. No cutting, no coding – just a 30-minute DIY installation that completely transforms your FJ’s driving experience.

Why Replace Your FJ Cruiser Steering Wheel?

• The factory FJ Cruiser steering wheel is  notoriously thin and “wimpy”  – FJ owners consistently complain it feels light and not truck-like

• Original leather becomes  worn, shiny, and slippery , especially after years of off-road use

• No ergonomic thumb support leads to  hand fatigue on long drives

• The FJ’s all-black interior lacks the modern flair a carbon fiber wheel brings

• A thicker, contoured wheel provides  better control on rugged trails  and more confident daily driving

Our wheel delivers:

• Thicker, ergonomic rim  with molded thumb rests – eliminates the “skinny wheel” complaint

• Perforated leather  – breathable, non-slip, sweat-resistant for hot climates and active driving

• Red center ring  – aggressive accent that complements the FJ’s bold exterior

• Real carbon fiber  – lightweight, authentic 3K weave with UV-stable clear coat

• 30-minute DIY installation

Product Specifications

Paddle shifters  – FJ Cruiser does not have factory paddle shifters; the wheel comes without paddle cutouts.
Factory controls  – Steering wheel audio and cruise controls transfer directly from your original wheel.

What’s Included in the Box

• 1 x Real carbon fiber steering wheel

• 1 x Hex key set

• 1 x QR code link to FJ Cruiser-specific video installation guide

You reuse your factory airbag, horn button, and switch modules (audio/cruise). No additional parts required.

Key Benefits

• OEM airbag compatible  – Direct fit, no warning lights, no electrical issues

• Retains all factory controls  – Volume, track, cruise, and phone controls work perfectly

• Black perforated leather  – Sweat-wicking, non-slip grip for off-road maneuvers and daily commutes

• Ergonomic thumb rests  – Reduces hand fatigue on long highway drives or rocky trails

• Thicker rim  – The FJ’s factory “wimpy” wheel is gone; replaced with a confident, truck-worthy grip

• Weight reduction  – Approximately 1.2 lbs lighter than the factory steel-frame wheel, improving steering feel

• Direct fit  – Uses factory spline, clock spring, and wiring

Installation Overview (DIY – 30–40 minutes)

1. Disconnect negative battery terminal, wait 10 minutes for airbag system discharge

2. Remove factory airbag using T30 Torx (two side access holes on back of wheel)

3. Unplug airbag and control switch connectors

4. Remove center 19mm bolt (use breaker bar if tight – FJ bolts can be stubborn)

5. Pull off old wheel – mark straight-ahead position (tape on steering column)

6. Transfer factory switches (audio, cruise) to new wheel

7. Align new wheel onto splines, torque center bolt to 35 lb-ft (48 Nm)

8. Reconnect all connectors, snap airbag back in

9. Reconnect battery, test horn, audio, and cruise controls