First, let's talk about the most common halogen headlights. The principle is to inject halogen gases such as iodine or bromine into the bulb, and the sublimated tungsten filament and halogen react chemically at high temperature. After cooling, the tungsten will solidify in the tungsten filament again, and the repeated cycle will produce light.
This process of regeneration makes the service life of halogen lamps four times longer than that of incandescent lamps. Generally speaking, the life of halogen lamps is 300 to 500 hours.
If you drive on the night road for an hour every day, you will have to change the bulb in more than a year. After the normal life span, the brightness of the headlights will become dimmer and dimmer until it is completely off.
Make a xenon lamp. This is also called HID gas discharge headlight. It uses high-pressure xenon gas wrapped in a quartz tube to replace the traditional tungsten filament we just mentioned. The xenon gas is activated by high-voltage current to form a beam of arc light, which can continuously discharge and emit light between the two poles. Compared with halogen lamps, the service life is about ten times longer.
The life of xenon lamp is about 2500-3000 hours
The current required for xenon lamp to work is 3.5 amps, and the service life is about 2500 to 3000 hours. I also found that Philips has a standard that the light decay cannot exceed 30% after 2250 hours.
I just talked about the car that has xenon when it is bought. Many friends have converted halogen lamps into xenon lamps by themselves, so they need to add an additional ballast.
The life of LED lamp is 60,000-100,000 hours
LED has a super long service life, 60,000 to 100,000 hours, which is really very durable. Moreover, after 30,000 hours of use, the light decay will not exceed 5%. It has a long life and is not easy to dim. Not suitable for long-term lighting, poor heat dissipation
However, LED lamps are not suitable for long-term lighting because they do not dissipate heat well. If the heat dissipation of car lights is not good, it is easy to produce temporary or permanent damage.
How to Care for Your Headlights
Unfortunately, it isn't possible to prolong the life of the headlights.Headlight bulbs should be replaced regularly similar to other consumables (engine oil, coolant automatic transmission fluid brake pads, wipers and so on.). For instance, halogen bulbs wear out over time and the glass's walls get dark or hazy.The result is dim lighting as well as uneven light distribution and a decrease in safety while driving at night.
Things like vehicle make and model and bulb type, quality, the season the driving habits of drivers, and operating conditions may influence the life that your headlights last. Drivers who drive a lot in the evening or off-road might have to replace the headlight bulb more often as compared to those who use their headlights during the day.
This is why it's crucial to check regularly all indoor and outdoor lighting. Halogen bulbs lose a substantial amount of brightness before they are completely burned out. If you notice that your headlights are dimmer than normal and you want to change them, do so them prior to when they stop working. Perhaps you should upgrade to a more powerful LED or HID?
How to Replace a Headlight Bulb
The positive side is that replacing the halogen bulb that has burned out isn't as hard as it may sound The main steps are identical to changing the headlight bulb in the 2014 Honda Accord. The procedure involves locating the bulb's housing, taking off the rubber covers, removing the springs and then taking out the bulb. If you are replacing the bulb be careful not to touch the glass component as moisture and oils from your fingers or hands could cause the bulb to explode when it is heated up. Remember that headlight bulbs for cars are available in various shapes and sizes in addition to the dimension you require will depend on whether you own HID or halogen headlights.For instance the halogen bulbs are available in H4, H3, and H1, H7, H10 and H11, while HID bulbs are available in the D2S and D1R D3R and D4R.Make sure you've got the right bulb size because you shouldn't for instance, put an H4 bulb in an H3 housing or reverse it.If in doubt, consult your owner's manual.
In addition you are checking the aiming of your headlights and headlight lens is just as crucial as making sure your bulbs are in good condition. Foggy, yellowed or faded headlights are less effective in shining light on the road.There are numerous DIY ways to restore the clarity of old headlight lenses. However, there are also accessible headlight cleaning kits that can accomplish the same task cheaper than the experts will cost.
How to clean car headlights by baking them with lemon and baking Soda
Your headlights are undoubtedly among the most important components of your vehicle. When driving at night, or during bad weather without them could result in serious harm. If you discover that your headlights have been damaged, you must bring them in for repairs whenever you can.
But, don't be waiting until your headlights are broken before taking charge of them. The cleanliness of your vehicle directly impacts how bright its headlights are when they are used. So, keeping your headlights clean is essential.It sounds like possible cost-saving measure it's not.
It is not necessary to purchase premium cleaning products or expensive restoration services, as long as you've got an unopened lemon and a container of baking soda. This tried and tested cleaning product will be a boon for your headlights since it helps remove marks and stains, even scratches on the surface.The most appealing aspect is that it's very simple to create.
Formulate the Best Headlight Cleaning Solution
There are two alternative yet equally effective methods for cleaning your headlights with this method. It is all dependent on your preference for cleaning. One option is mixing the ingredients prior to mixing them and then clean your headlights.
1.Mix or shake a tiny quantity of baking soda in the bowl.
2.Cut the lemon in half, then squeeze the juice into the baking soda. mix it with the juice of the lemon.Make sure to stir it until it turns into a paste.
3.When the paste is prepared then take the bowl out and begin application to the headlights.Hand-applying it may be the most effective way to apply it.
4.After waiting for a few moments after which you can clean and then clean your headlamps.We suggest using a microfiber towel to avoid streaks.
If you're looking for an approach that is more straightforward to cleansing your headlights using a lemon coated in baking soda would work best for you.Although you'll still need to begin with a small bowl that contains baking soda how you prepare the lemon is quite different.
1.Once you've cut your lemon into two halves, place the other half in the bowl that contains baking soda.Be sure to squeeze lemon while you move it to ensure that the baking soda is covered the bottom of the lemon.
2.Pick up the bowl and lemon out of the car.Rub the headlights gently using your lemon, in a circle movement.
3.After applying the paint evenly, wash thoroughly and then wipe dry headlights using a an absorbent towel.