Светодиодные задние фонари с затемненными линзами, анимацией включения и непрерывным указателем поворота для Honda Jazz 2014-2018 годов выпуска.

So none of these reviews helped me and if you want to know if this product works for your 2015-2018 Honda fit (not sure when they stopped making them) it does work. Also, you will not need to cut wires or anything crazy. I've seen videos for this product and they help but they cut wires. Trust me, you wont have to. I didn't and I am against cutting because I have messed that up before. So First you'll need T10 to T20 adapters. you can buy them yourself or contact the people which is integrity Time and I recommend this because it is free. Now, When the tower lights you'll need to drill a hole to feed the wire into the back door and grab them from the hole as you reach your hand. this means you need to take the plastic cover from the back door off. Its easy it is connected with clips. I used electrical tape to wrap around the wire so the hole wouldn't cut the wire. I also, wrapped the wire around the other tubes and taped that so it wouldn't move and because its a lot of wire and I did the same to the other. The tower lights are super easy. you just plug the red with red and black and black then you plug the click plug which is in a bag into the cars license plate light. I taped where I had to plug the wires with the other wires just in case. Now, the actual lights. So, after you get the adapters, because you cant do anything until you have them, you just plug them in. But you need to make sure you remember what you unplugged, so like which light is the reverse light and which light is the blinker, because they have to plug into the right ones. When you look at the new lights you'll notice that the plugs are super different and that there is a white wire that is small. Thats the plug you need to put the adapter on. I've watched videos and read about these lights and everyone that sees that small one is confused so don't worry because you have that adapter. Although, it may look weird but once you unplug the light bulbs from their sockets you'll be able to plug them in. Now the left tail light has an extra hole with a red wire coming out just tape that one with electrical tape because its for a fog light that you dont have and the right tail light doesn't have it. Thats ok. Anyways, because you remembered where the blinker light was plug that to the yellow wire and the reverse light to the white wire and the third to the top. They are labeled on the plastic so you can know that too. Lastly, this is the final thing don't screw them in until you check them. Once you plug everything in check to see if they work and if the blinker or reverse doesn't work, then don't worry, go back pull the plugs out, flip them over and plug them again. That should work if the blinker is running fast, then you plugged them in wrong. The Big trouble I had was the product they gave me was bad, because the lights would blow a fuse every time I turned my car on. So watch out for that. The people where nice and sent a replacement right away. They look great. I hope This long review helped you. It's been a struggle to finally getting these to work and not killing my car. Good luck! Also my car is a 2015 Honda fit.

Vistoso y viene con buen embalaje

So they lost my order but sent a second one. Ended up taking weeks. Also, this is not a plug and play item and the directions, (even the pictures) do nothing to help. I still haven’t finished installing them but already I can tell they’ll be awesome! I’ll update after they’re installed.

The media could not be loaded.

Needed an adapter and some xacto knifing to work. It's almost plug and play for 2015+ US Honda Fit, but not quite. Looks amazing once installed. Highly recommended.